{"title":"Mastic","description":"\u003ch1 style=\"text-align: center;\"\u003eMastic\u003c\/h1\u003e","products":[{"product_id":"childers-cp-10-white-coating-1-gallon","title":"Childers CP-10 White Coating 1 gallon","description":"\u003ch2 style=\"text-align: center;\" align=\"left\"\u003e\u003cspan\u003eChilders CP-10 White Coating - 1 gallon\u003c\/span\u003e\u003c\/h2\u003e \u003cp align=\"left\"\u003e\u003cspan\u003eVI-CRYL® CP-10 weather barrier coating is a tough, durable, and fire-resistive water based mastic for most types of thermal insulation and finishing and insulating cements. It is very thixotropic - it looks heavy but spreads easily. It is available in a variety of standard and special faderesistant colors. It is outdoor rated and U.V. resistant.\u003c\/span\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003eUSES\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cspan\u003eVI-CRYL CP-10 weather barrier coating is unsurpassed for the mechanical protection and weatherproofing of thermal insulations both outdoors and indoors, in hot, cold, and dual-temperature service. However, since it is a ‘breathing’ coating (vapors under pressure will pass through it) it should only be used over insulations in lowtemperature, or dual-temperature service when the insulations themselves are vapor barriers. VI-CRYL CP-11 has also found use throughout the thermal insulation industry as a coating used over closed cell polyethylene and polyurethane foam insulations. Industry experience has demonstrated that all weather barrier coatings may blister when applied over polystyrene board. This effect may be limited by the use of white colored coatings. VI-CRYL CP-11 weather barrier coating in its Metallic Gray color is the ideal companion product to Aluminum and Stainless Steel Jacketing.\u003c\/span\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cspan\u003e\u003cem\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cspan\u003eVI-CRYL CP-10\/11 weather barrier coating is easy to apply by Trowel, Brush or Heavy-Duty Airless Spray. Its thixotropic consistency yields a smooth, attractive finish even over rough substrates; it readily fills gaps and imperfections. VI-CRYL CP-10\/11 coating should be applied with glass fiber reinforcing mesh.\u003c\/span\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eADVANTAGES\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eIn the wet state, VI-CRYL CP-10\/11 weather barrier coatings is non-flammable. It contains no solvents that will attack insulations or facings.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eThe cured film is tough, flexible, and resists most common chemicals and many solvents.\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eIt is fire-resistive: its flame spread index being within the range of acceptance of government and industrial agencies.\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp align=\"left\"\u003e\u003cem\u003e\u003cstrong\u003e\u003cspan\u003eCERTIFIED\u003c\/span\u003e\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eMeets NFPA Standard 90-A and 90-B 25\/50 requirements. \u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eThis product has been tested according to ASTM E-84 (Surface Burning Characteristics of Building Materials).\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eMeets requirements for LEED® IEQ 4.2 Low-Emitting Materials, Paints and Coatings. \u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eCP-10 VOC: 45 g\/l, less water and exempt solvents, CP-11 VOC: 20 g\/l, less water and exempt solvents.\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003e-------------------------------------------------------------\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e White, metallic gray, black. \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWet Weight: \u003c\/strong\u003e11.4 lbs.\/U.S. gal. (1.37 kg\/liter)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eAverage Non-Volatile:\u003c\/strong\u003e 60% to 64% by volume (64% by weight)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApplication Temperature Range: \u003c\/strong\u003e40°F to 100°F (4°C to 38°C)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDrying Time: \u003c\/strong\u003eTouch - 2-4 hours, Through - 24-36 hours (Drying time will vary depending upon film thickness, temperature and humidity.)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 6 U.S. gal.\/100 sq. ft. (2.4 l\/sq.m) (Varies with substrate and membrane.)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClean Up:\u003c\/strong\u003e Warm, soapy water (wet) xylol (dry)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWater Vaper Permeance\u003c\/strong\u003e ASTM E-96: Greater than 1.0 perm for 1\/16 inch (0.16cm) dry film. (Procedure B) \u003c\/li\u003e \u003c\/ul\u003e \u003ctable id=\"ctl00_docList\" style=\"height: 28px; width: 100px;\" border=\"0\" cellspacing=\"0\" cellpadding=\"0\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e \u003cul\u003e \u003cli\u003e\u003ca class=\"default_link\" title=\"DS CP-10 CP-11 R0311.pdf\" href=\"http:\/\/www.fosterproducts.com\/docHandler.aspx?docid=e210ed48-7f60-4608-baed-bb93394e11c9\" target=\"_blank\"\u003ePDS\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e \u003cul\u003e \u003cli\u003e\u003ca class=\"default_link\" title=\"CP-10 SDS.pdf\" href=\"http:\/\/www.fosterproducts.com\/docHandler.aspx?docid=cf615332-e03c-4a2e-940a-15a5fb46828c\" target=\"_blank\"\u003eSDS-CP-10\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e","brand":"Foster Products","offers":[{"title":"Default Title","offer_id":45783915167917,"sku":"240-SCBCP10","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/CP10__33513.png?v=1773328335"},{"product_id":"childers-cp-10-white-coating-5-gallon","title":"Childers CP-10 White Coating 5 gallon","description":"\u003ch2 style=\"text-align: center;\" align=\"left\"\u003eChilders CP-10 White Coating 5 gallon\u003c\/h2\u003e \u003cp align=\"left\"\u003eVI-CRYL® CP-11 weather barrier coating is a tough, durable, and fire-resistive water based mastic for most types of thermal insulation and finishing and insulating cements. It is very thixotropic - it looks heavy but spreads easily. It is available in a variety of standard and special faderesistant colors. It is outdoor rated and U.V. resistant.\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cstrong\u003e\u003cem\u003eUSES\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003eVI-CRYL CP-11 weather barrier coating is unsurpassed for the mechanical protection and weatherproofing of thermal insulations both outdoors and indoors, in hot, cold, and dual-temperature service. However, since it is a ‘breathing’ coating (vapors under pressure will pass through it) it should only be used over insulations in lowtemperature, or dual-temperature service when the insulations themselves are vapor barriers. VI-CRYL CP-11 has also found use throughout the thermal insulation industry as a coating used over closed cell polyethylene and polyurethane foam insulations. Industry experience has demonstrated that all weather barrier coatings may blister when applied over polystyrene board. This effect may be limited by the use of white colored coatings. VI-CRYL CP-11 weather barrier coating in its Metallic Gray color is the ideal companion product to Aluminum and Stainless Steel Jacketing.\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cem\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003eVI-CRYL CP-10\/11 weather barrier coating is easy to apply by Trowel, Brush or Heavy-Duty Airless Spray. Its thixotropic consistency yields a smooth, attractive finish even over rough substrates; it readily fills gaps and imperfections. VI-CRYL CP-10\/11 coating should be applied with glass fiber reinforcing mesh.\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cem\u003e\u003cstrong\u003eADVANTAGES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIn the wet state, VI-CRYL CP-10\/11 weather barrier coatings is non-flammable. It contains no solvents that will attack insulations or facings.\u003c\/li\u003e \u003cli\u003eThe cured film is tough, flexible, and resists most common chemicals and many solvents.\u003c\/li\u003e \u003cli\u003eIt is fire-resistive: its flame spread index being within the range of acceptance of government and industrial agencies.\u003c\/li\u003e \u003c\/ul\u003e \u003cp align=\"left\"\u003e\u003cem\u003e\u003cstrong\u003eCERTIFIED\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets NFPA Standard 90-A and 90-B 25\/50 requirements. \u003c\/li\u003e \u003cli\u003eThis product has been tested according to ASTM E-84 (Surface Burning Characteristics of Building Materials).\u003c\/li\u003e \u003cli\u003eMeets requirements for LEED® IEQ 4.2 Low-Emitting Materials, Paints and Coatings. \u003c\/li\u003e \u003cli\u003eCP-10 VOC: 45 g\/l, less water and exempt solvents, CP-11 VOC: 20 g\/l, less water and exempt solvents.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003e-------------------------------------------------------------\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e White, metallic gray, black. \u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWet Weight: \u003c\/strong\u003e11.4 lbs.\/U.S. gal. (1.37 kg\/liter)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eAverage Non-Volatile:\u003c\/strong\u003e 60% to 64% by volume (64% by weight)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApplication Temperature Range: \u003c\/strong\u003e40°F to 100°F (4°C to 38°C)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDrying Time: \u003c\/strong\u003eTouch - 2-4 hours, Through - 24-36 hours (Drying time will vary depending upon film thickness, temperature and humidity.)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 6 U.S. gal.\/100 sq. ft. (2.4 l\/sq.m) (Varies with substrate and membrane.)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClean Up:\u003c\/strong\u003e Warm, soapy water (wet) xylol (dry)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWater Vaper Permeance\u003c\/strong\u003e ASTM E-96: Greater than 1.0 perm for 1\/16 inch (0.16cm) dry film. (Procedure B) \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFiles-\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca class=\"default_link\" title=\"DS CP-10 CP-11 R0311.pdf\" href=\"http:\/\/www.fosterproducts.com\/docHandler.aspx?docid=e210ed48-7f60-4608-baed-bb93394e11c9\" target=\"_blank\"\u003ePDS\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca class=\"default_link\" title=\"CP-10 SDS.pdf\" href=\"http:\/\/www.fosterproducts.com\/docHandler.aspx?docid=cf615332-e03c-4a2e-940a-15a5fb46828c\" target=\"_blank\"\u003eSDS-CP-10\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"Foster Products","offers":[{"title":"Default Title","offer_id":45783915462829,"sku":"240-SCBCP10-5","price":160.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/16339__01102.jpg?v=1773328334"},{"product_id":"childers-cp-11-vi-cryl-mastic-coating-1-gallon-white","title":"Childers CP-11 VI-CRYL Mastic Coating 1 Gallon - White","description":"\u003ch2 style=\"text-align: center;\" align=\"left\"\u003eChilders CP-11 VI-CRYL Mastic Coating 1 Gallon - White\u003c\/h2\u003e \u003cp align=\"left\"\u003eVI-CRYL® CP-11 weather barrier coating is a tough, durable, and fire-resistive water based mastic for most types of thermal insulation and finishing and insulating cements. It is very thixotropic - it looks heavy but spreads easily. It is available in a variety of standard and special faderesistant colors. It is outdoor rated and U.V. resistant.\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cstrong\u003e\u003cem\u003eUSES\u003c\/em\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003eVI-CRYL CP-11 weather barrier coating is unsurpassed for the mechanical protection and weatherproofing of thermal insulations both outdoors and indoors, in hot, cold, and dual-temperature service. However, since it is a ‘breathing’ coating (vapors under pressure will pass through it) it should only be used over insulations in lowtemperature, or dual-temperature service when the insulations themselves are vapor barriers. VI-CRYL CP-11 has also found use throughout the thermal insulation industry as a coating used over closed cell polyethylene and polyurethane foam insulations. Industry experience has demonstrated that all weather barrier coatings may blister when applied over polystyrene board. This effect may be limited by the use of white colored coatings. \u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cem\u003e\u003cstrong\u003eAPPLICATION\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cp align=\"left\"\u003eVI-CRYL CP-10\/11 weather barrier coating is easy to apply by Trowel, Brush or Heavy-Duty Airless Spray. Its thixotropic consistency yields a smooth, attractive finish even over rough substrates; it readily fills gaps and imperfections. VI-CRYL CP-10\/11 coating should be applied with glass fiber reinforcing mesh.\u003c\/p\u003e \u003cp align=\"left\"\u003e\u003cem\u003e\u003cstrong\u003eADVANTAGES\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIn the wet state, VI-CRYL CP-10\/11 weather barrier coatings is non-flammable. It contains no solvents that will attack insulations or facings.\u003c\/li\u003e \u003cli\u003eThe cured film is tough, flexible, and resists most common chemicals and many solvents.\u003c\/li\u003e \u003cli\u003eIt is fire-resistive: its flame spread index being within the range of acceptance of government and industrial agencies.\u003c\/li\u003e \u003c\/ul\u003e \u003cp align=\"left\"\u003e\u003cem\u003e\u003cstrong\u003eCERTIFIED\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eMeets NFPA Standard 90-A and 90-B 25\/50 requirements. \u003c\/li\u003e \u003cli\u003eThis product has been tested according to ASTM E-84 (Surface Burning Characteristics of Building Materials).\u003c\/li\u003e \u003cli\u003eMeets requirements for LEED® IEQ 4.2 Low-Emitting Materials, Paints and Coatings. \u003c\/li\u003e \u003cli\u003eCP-10 VOC: 45 g\/l, less water and exempt solvents, CP-11 VOC: 20 g\/l, less water and exempt solvents.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cem\u003e\u003cstrong\u003e-------------------------------------------------------------\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eColor Options:\u003c\/strong\u003e White\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWet Weight: \u003c\/strong\u003e11.4 lbs.\/U.S. gal. (1.37 kg\/liter)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eAverage Non-Volatile:\u003c\/strong\u003e 60% to 64% by volume (64% by weight)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eApplication Temperature Range: \u003c\/strong\u003e40°F to 100°F (4°C to 38°C)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDrying Time: \u003c\/strong\u003eTouch - 2-4 hours, Through - 24-36 hours (Drying time will vary depending upon film thickness, temperature and humidity.)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e 6 U.S. gal.\/100 sq. ft. (2.4 l\/sq.m) (Varies with substrate and membrane.)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eClean Up:\u003c\/strong\u003e Warm, soapy water (wet) xylol (dry)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWater Vaper Permeance\u003c\/strong\u003e ASTM E-96: Greater than 1.0 perm for 1\/16 inch (0.16cm) dry film. (Procedure B) \u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eFiles-\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003ca href=\"https:\/\/4056846.app.netsuite.com\/core\/media\/media.nl?id=4376224\u0026amp;c=4056846\u0026amp;h=vIMqf5bqSGIxfTqakM04RmKTF21-f-OXRJgqrF5-e0g4pZ1F\u0026amp;_xt=.pdf\"\u003eProduct Data Sheet - Childers VICRYL CP-11\u003c\/a\u003e\u003c\/li\u003e \u003cli\u003e\u003ca class=\"default_link\" title=\"CP-11 SDS.pdf\" href=\"https:\/\/4056846.app.netsuite.com\/core\/media\/media.nl?id=4376225\u0026amp;c=4056846\u0026amp;h=9GdLoeuCcx0fBV5dXxwMqo8TmTFItltpeNodpAohnLy5akbU\u0026amp;_xt=.pdf\" target=\"_blank\"\u003eSDS-CP-11\u003c\/a\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"Foster Products","offers":[{"title":"Default Title","offer_id":45783915921581,"sku":"240-SCBCP11","price":48.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/16340__52158.jpg?v=1773328350"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/collections\/mastic__33954.jpg?v=1775049018","url":"https:\/\/www.jendcosafety.com\/collections\/mastic.oembed","provider":"Jendco Safety Supply","version":"1.0","type":"link"}