{"title":"Mixing Valve","description":"","products":[{"product_id":"haws-thermostatic-mixing-valve-twbs-ewe","title":"Haws Thermostatic Mixing Valve - TWBS.EWE","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Thermostatic Mixing Valve - TWBS.EWE\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eLead-free AXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment, with a flow rate of 12 gpm (45.4 L). \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model TWBS.EWE (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency eyewash fixtures requiring flow up to 12 gpm (45.4 L). Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 10 gpm (37.8 L). The improved lead-free brass design with a one piece casting uses internal check stops, over-sized valve seats, a shuttle design that eliminates valve binding, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (26 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 ° F (16 - 35 ° C). Maximum inlet temperature: 180 ° F (82 ° C). Recommended inlet temperature: 140 ° F (60 ° C). Minimum inlet temperature: 120 ° F (49 ° C) Inlet 1\/2\" NPT(F). Outlet 3\/4\" NPT(F).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range\u003c\/li\u003e \u003cli\u003eAXION's superior design and technology provide a complete safety solution for increased victim comfort.\u003c\/li\u003e \u003cli\u003eLowest internal pressure drop for this class of valve (advantage where supply pressure is low)\u003c\/li\u003e \u003cli\u003eWax based thermostat technology for fast response time with proven highly reliable temperature control\u003c\/li\u003e \u003cli\u003eHighest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)\u003c\/li\u003e \u003cli\u003eModular lead-free brass design with internal check stops\u003c\/li\u003e \u003cli\u003eOver-sized valve seats resist failures caused by foreign matter\u003c\/li\u003e \u003cli\u003eA new and efficient shuttle design eliminates valve binding\u003c\/li\u003e \u003cli\u003eA custom funnel design improves temperature control at low flow rates\u003c\/li\u003e \u003cli\u003eOutlet temperature is factory set to 85 ° F (29 ° C)\u003c\/li\u003e \u003c\/ul\u003e\u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 12 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 20\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 7\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 3\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 7\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 9\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/twbs_ewe_spec_sheet.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/intwbs_ewe.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/pbtwbs_ewe.pdf\"\u003eParts Breakdown Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/twbs_ewe.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/masterspecr_haws_emergency_plumbing_fixtures-1.doc\"\u003eMasterSpec\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/warranty_tmv.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45784323195053,"sku":"397-HAWSTWBS.EWE","price":3274.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/383110__02076.png?v=1773329460"},{"product_id":"haws-thermostatic-mixing-valve-twbs-hf","title":"Haws Thermostatic Mixing Valve - TWBS.HF","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Thermostatic Mixing Valve - TWBS.HF\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eLead-free AXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment, with a flow rate of 78 gpm (295 L). \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model TWBS.HF (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency shower and eyewash fixtures requiring flow up to 78 gpm (295 L). Unit employs a paraffin filled thermostatic mixing element with triple redundant anti-scald protection. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 79 gpm (299 L). The improved low lead brass design with a one piece casting uses internal check stops, over-sized valve seats, a shuttle design that eliminates valve sticking, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (26 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 ° F (16 - 35 ° C). Maximum inlet temperature: 180 ° F (82 ° C). Recommended inlet temperature: 140 ° F (60 ° C). Minimum inlet temperature: 120 ° F (49 ° C) Inlet 2\" NPT(F). Outlet 2\" NPT(F).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range\u003c\/li\u003e \u003cli\u003eAXION's superior design and technology provide a complete safety solution for increased victim comfort.\u003c\/li\u003e \u003cli\u003eLowest internal pressure drop for this class of valve (advantage where supply pressure is low)\u003c\/li\u003e \u003cli\u003eWax based thermostat technology for fast response time with proven highly reliable temperature control\u003c\/li\u003e \u003cli\u003eHighest Cold Water Bypass flow rate in the industry (100% of rated tepid flow rate)\u003c\/li\u003e \u003cli\u003eModular lead-free brass design with internal check stops\u003c\/li\u003e \u003cli\u003eOver-sized valve seats resist failures caused by foreign matter\u003c\/li\u003e \u003cli\u003eA new and efficient shuttle design eliminates valve sticking\u003c\/li\u003e \u003cli\u003eA custom funnel design improves temperature control at low flow rates\u003c\/li\u003e \u003cli\u003eOutlet temperature is factory set to 85 ° F (29 ° C)\u003c\/li\u003e \u003c\/ul\u003e\u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 78 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 20\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 13\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 6\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 10\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 35\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/twbs_hf_spec_sheet.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/intwbs_hf.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/pbtwbs_hf.pdf\"\u003eParts Breakdown Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/twbs_hf.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/masterspecr_haws_emergency_plumbing_fixtures-2.doc\"\u003eMasterSpec\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/warranty_tmv-1.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45784323784877,"sku":"397-HAWSTWBS.HF","price":6834.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/383111__91750.png?v=1773329461"},{"product_id":"haws-thermostatic-mixing-valve-twbs-she","title":"Haws Thermostatic Mixing Valve - TWBS.SHE","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Thermostatic Mixing Valve - TWBS.SHE\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eLead-free AXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency shower and eyewash equipment, with a flow rate of 74 gpm (280 L). \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model TWBS.SHE (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency eyewash fixtures requiring flow up to 74 gpm (280 L). Unit employs a paraffin filled thermostatic mixing element and a secondary high temperature limit valve to provide additional protection. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 50 gpm (189 L). The improved lead-free brass design with a one piece casting uses internal check stops, over-sized valve seats, a shuttle design that eliminates valve sticking, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (26 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 ° F (16 - 35 ° C). Maximum inlet temperature: 180 ° F (82 ° C). Recommended inlet temperature: 140 ° F (60 ° C). Minimum inlet temperature: 120 ° F (49 ° C) Inlet 1-1\/4\" NPT(F). Outlet 1-1\/4\" NPT(F).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA flow rate of 1 to 74 gpm (280 L) for better temperature control across the operating range\u003c\/li\u003e \u003cli\u003eAXION's superior design and technology provide a complete safety solution for increased victim comfort.\u003c\/li\u003e \u003cli\u003eLowest internal pressure drop for this class of valve (advantage where supply pressure is low)\u003c\/li\u003e \u003cli\u003eWax based thermostat technology for fast response time with proven highly reliable temperature control\u003c\/li\u003e \u003cli\u003eHighest Cold Water Bypass flow rate in the industry (68% of rated tepid flow rate)\u003c\/li\u003e \u003cli\u003eModular lead-free brass design with internal check stops\u003c\/li\u003e \u003cli\u003eOver-sized valve seats resist failures caused by foreign matter\u003c\/li\u003e \u003cli\u003eA new and efficient shuttle design eliminates valve binding\u003c\/li\u003e \u003cli\u003eA custom funnel design improves temperature control at low flow rates\u003c\/li\u003e \u003cli\u003eOutlet temperature is factory set to 85 ° F (29 ° C)\u003c\/li\u003e \u003c\/ul\u003e\u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 74 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 20\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 11\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 10\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 26\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/twbs_she_spec_sheet.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/intwbs_she.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/pbtwbs_she.pdf\"\u003eParts Breakdown Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/twbs_she.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/masterspecr_haws_emergency_plumbing_fixtures-3.doc\"\u003eMasterSpec\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/warranty_tmv-2.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45784324341933,"sku":"397-HAWSTWBS.SHE","price":5638.95,"currency_code":"USD","in_stock":true}]},{"product_id":"haws-thermostatic-mixing-valve-9201e","title":"Haws Thermostatic Mixing Valve - 9201E","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Thermostatic Mixing Valve - 9201E\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eAXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L). \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model 9201E (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency shower and eyewash fixtures requiring flow up to 31 gpm (117.3 L). Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 20 gpm (75.7 L). The improved brass design with a one piece casting uses internal check stops, oversized valve seats, a shuttle design that eliminates valve sticking, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (26 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 ° F (16 - 35 ° C). Maximum inlet temperature: 180 ° F (82 ° C). Recommended inlet temperature: 140 ° F (60 ° C). Minimum inlet temperature: 120 ° F (49 ° C) Inlets 1-1\/4\" NPT(F). Outlet 1-1\/4\" NPT(F).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range\u003c\/li\u003e \u003cli\u003eAXION's superior design and technology provide a complete safety solution for increased victim comfort.\u003c\/li\u003e \u003cli\u003eLowest internal pressure drop for this class of valve (advantage where supply pressure is low)\u003c\/li\u003e \u003cli\u003eWax based thermostat technology for fast response time with proven highly reliable temperature control\u003c\/li\u003e \u003cli\u003eHighest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)\u003c\/li\u003e \u003cli\u003eModular brass design with internal check stops\u003c\/li\u003e \u003cli\u003eOver-sized valve seats resist failures caused by foreign matter\u003c\/li\u003e \u003cli\u003eA new and efficient shuttle design eliminates valve sticking\u003c\/li\u003e \u003cli\u003eA custom funnel design improves temperature control at low flow rates\u003c\/li\u003e \u003cli\u003eOutlet temperature is factory set to 85 ° F (29 ° C).\u003c\/li\u003e \u003c\/ul\u003e\u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 31 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 3\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 7.625\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 3.5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 5.375\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 10\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9201e_spec_sheet.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/in9201e.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/pb9201e.pdf\"\u003eParts Breakdown Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9201e.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/masterspecr_haws_emergency_plumbing_fixtures-12.doc\"\u003eMasterSpec\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/warranty_tmv-7.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45784324735149,"sku":"397-HAWS9201E","price":1806.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/383051__56397.png?v=1773329464"},{"product_id":"haws-thermostatic-mixing-valve-9201efe","title":"Haws Thermostatic Mixing Valve - 9201EFE","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Thermostatic Mixing Valve - 9201EFE\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003e AXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye\/face wash, with a flow rate of 12 gpm (38.8 L). \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model 9201EFE (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water of up to 12 gpm (45.4 L) for emergency eyewash fixtures. Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 10 gpm (37.8 L). The improved brass design with a one piece casting uses internal check stops, over-sized valve seats, a shuttle design that eliminates valve binding, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (29 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 ° F (16 - 35 ° C). Min\/max inlet hot water temperature: 120 °\/180 ° F (49 °\/82 ° C), with recommended inlet temperature: 140 ° F (60 ° C). Min\/max inlet cold water temperature: 40 °\/70 ° (4.4 °\/21.1 ° C). Inlet 1\/2\" NPT(F). Outlet 3\/4\" NPT(F).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range\u003c\/li\u003e \u003cli\u003eAXION's superior design and technology provide a complete safety solution for increased victim comfort.\u003c\/li\u003e \u003cli\u003eLowest internal pressure drop for this class of valve (advantage where supply pressure is low)\u003c\/li\u003e \u003cli\u003eWax based thermostat technology for fast response time with proven highly reliable temperature control\u003c\/li\u003e \u003cli\u003eHighest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate)\u003c\/li\u003e \u003cli\u003eModular brass design with internal check stops\u003c\/li\u003e \u003cli\u003eOver-sized valve seats resist failures caused by foreign matter\u003c\/li\u003e \u003cli\u003eA new and efficient shuttle design eliminates valve sticking\u003c\/li\u003e \u003cli\u003eA custom funnel design improves temperature control at low flow rates\u003c\/li\u003e \u003cli\u003eOutlet temperature is factory set to 85 ° F (29 ° C).\u003c\/li\u003e \u003c\/ul\u003e\u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 12 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 6\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 3\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 7\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9201efe_spec_sheet.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/in9201efe.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/pb9201efe.pdf\"\u003eParts Breakdown Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9201efe.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/masterspecr_haws_emergency_plumbing_fixtures-9.doc\"\u003eMasterSpec\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/warranty_tmv-4.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45784325456045,"sku":"397-HAWS9201EFE","price":1245.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/383052__84823.png?v=1773329466"},{"product_id":"haws-thermostatic-mixing-valve-9201ew","title":"Haws Thermostatic Mixing Valve - 9201EW","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Thermostatic Mixing Valve - 9201EW\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eAXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye\/face wash, with a flow rate of 10 gpm (38.8 L). \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model 9201EW (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to a single emergency eye\/face wash fixture requiring flow up to 10 gpm (37.8 L). Unit employs a paraffin filled thermostatic mixing element. Cold Water Bypass flow rate of 3.8 gpm (14.4 L). The improved brass design with supplied check valves, over-sized valve seats, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (29 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 ° F (16 - 32 ° C). Min\/max inlet hot water temperature: 120 °\/180 ° F (49À ƒÃ† ’À ‚â € š °\/82 ° C), with recommended inlet temperature: 140 ° F (60 ° C). Min\/max inlet cold water temperature: 40 °\/65 ° (4.4 °\/18.3 ° C). Inlets and outlet: 1\/2\" NPT(F).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range\u003c\/li\u003e \u003cli\u003eAXION's superior design and technology provide a complete safety solution for increased victim comfort.\u003c\/li\u003e \u003cli\u003eWax based thermostat technology for fast response time with proven highly reliable temperature control\u003c\/li\u003e \u003cli\u003eCold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071)\u003c\/li\u003e \u003cli\u003eModular brass design with supplied check valves\u003c\/li\u003e \u003cli\u003eOver-sized valve seats resist failures caused by foreign matter\u003c\/li\u003e \u003cli\u003eEfficient funnel design improves temperature control at low flow rates\u003c\/li\u003e \u003cli\u003eOutlet temperature is factory set to 85 ° F (29 ° C).\u003c\/li\u003e \u003cli\u003eTempered water: High temperature limit is factory set to 90 ° F (32 ° C).\u003c\/li\u003e \u003c\/ul\u003e \u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 10 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 3\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 2.625\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 6.125\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 5.25\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 2\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9201ew.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/in9201ew.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/pb9201ew.pdf\"\u003eParts Breakdown Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9201ew-1.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/masterspecr_haws_emergency_plumbing_fixtures-10.doc\"\u003eMasterSpec\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/warranty_tmv-5.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45784326013101,"sku":"397-HAWS9201EW","price":743.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/383053__32351.png?v=1773329471"},{"product_id":"haws-thermostatic-mixing-valve-9201h","title":"Haws Thermostatic Mixing Valve - 9201H","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Thermostatic Mixing Valve - 9201H\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eLead-free AXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L). \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model 9201H (patent pending) is a lead-free thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency shower and eyewash fixtures requiring flow up to 31 gpm (117.3 L). Unit employs two paraffin filled thermostatic mixing elements. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 20 gpm (75.7 L). The improved brass design with a one piece casting uses internal check stops, oversized valve seats, a shuttle design that eliminates valve sticking, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (26 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 ° F (16 - 35 ° C). Maximum inlet temperature: 180 ° F (82 ° C). Recommended inlet temperature: 140 ° F (60 ° C). Minimum inlet temperature: 120 ° F (49 ° C) Inlets 1\" NPT(F). Outlet 1-1\/4\" NPT(F).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range\u003c\/li\u003e \u003cli\u003eAXION's superior design and technology provide a complete safety solution for increased victim comfort.\u003c\/li\u003e \u003cli\u003eLowest internal pressure drop for this class of valve (advantage where supply pressure is low)\u003c\/li\u003e \u003cli\u003eWax based thermostat technology for fast response time with proven highly reliable temperature control\u003c\/li\u003e \u003cli\u003eHighest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)\u003c\/li\u003e \u003cli\u003eModular lead-free brass design with internal check stops\u003c\/li\u003e \u003cli\u003eOver-sized valve seats resist failures caused by foreign matter\u003c\/li\u003e \u003cli\u003eA new and efficient shuttle design eliminates valve sticking\u003c\/li\u003e \u003cli\u003eA custom funnel design improves temperature control at low flow rates\u003c\/li\u003e \u003cli\u003eOutlet temperature is factory set to 85 ° F (29 ° C).\u003c\/li\u003e \u003c\/ul\u003e\u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 31 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 20\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 7\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 8\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 13\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9201h_spec_sheet.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/in9201h.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/pb9201h.pdf\"\u003eParts Breakdown Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9201h.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/masterspecr_haws_emergency_plumbing_fixtures-11.doc\"\u003eMasterSpec\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/warranty_tmv-6.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45784326733997,"sku":"397-HAWS9201H","price":3203.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/383054__02817.png?v=1773329468"},{"product_id":"haws-thermostatic-mixing-valve-9202e","title":"Haws Thermostatic Mixing Valve - 9202E","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Thermostatic Mixing Valve - 9202E\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eAXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 78 gpm (295 L). \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model 9202E (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency eyewash fixtures requiring flow up to 78 gpm (295 L). Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 50 gpm (189 L). The improved brass design with a one piece casting uses internal check stops, over-sized valve seats, a shuttle design that eliminates valve binding, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (26 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60-95 ° F (15 - 35 ° C). Maximum inlet temperature: 180 ° F (82 ° C). Recommended inlet temperature: 140 ° F (60 ° C). Minimum inlet temperature: 120 ° F (49 ° C) Inlets 1-1\/4\" NPT(F). Outlet 1-1\/4\" NPT(F).\u003c\/p\u003e \u003cul\u003e \u003cli\u003eA flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range\u003c\/li\u003e \u003cli\u003eLowest internal pressure drop for this class of valve (advantage where supply pressure is low)\u003c\/li\u003e \u003cli\u003eWax based thermostat technology for fast response time with proven highly reliable temperature control\u003c\/li\u003e \u003cli\u003eHighest Cold Water Bypass flow rate in the industry (64% of rated tepid flow rate)\u003c\/li\u003e \u003cli\u003eModular brass design with internal check stops\u003c\/li\u003e \u003cli\u003eOver-sized valve seats resist failures caused by foreign matter\u003c\/li\u003e \u003cli\u003eA new and efficient shuttle design eliminates valve sticking\u003c\/li\u003e \u003cli\u003eA custom funnel design improves temperature control at low flow rates\u003c\/li\u003e \u003cli\u003eOutlet temperature is factory set to 85 ° F (29 ° C).\u003c\/li\u003e \u003cli\u003eTempered water: High temperature limit is factory set to 90 ° F (32 ° C).\u003c\/li\u003e \u003c\/ul\u003e\u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 78 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e Brass\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 10\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 7\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 18\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9202e_spec_sheet.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/in9202e.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/pb9202e.pdf\"\u003eParts Breakdown Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/9202e.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/warranty_tmv-3.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45784327323821,"sku":"397-HAWS9202E","price":2355.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/383055__51728.png?v=1773329481"},{"product_id":"haws-instantaneous-water-heater-twbs-ew-h","title":"Haws Instantaneous Water Heater - TWBS.EW.H","description":"\u003ch2 style=\"text-align: center;\"\u003eHaws Instantaneous Water Heater - TWBS.EW.H\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003ePrepackaged instantaneous electrical water heater, 480 VAC\/3 phase\/20 kW, fully engineered and tested system with fail-safe features to produce up to 6 gpm (22.7 L) tempered water for eye washes. \u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eHaws Model TWBS.EW.H on-demand, prepackaged, fully engineered and tested tempering system to provide tempered water instantaneously. System is designed to increase cold water temperature by a minimum of 34 ° F (19 ° C) at 4 gpm (15.1 L) flow and 68 ° F (38 ° C) at 2.0 gpm (7.5 L); thus it is suitable for single eyewash application. Outlet water temperature is factory set at 80 ° F (26 ° C). System consists of a UL listed 20 KW electrical instantaneous water heater, a hot shutoff valve, a bypass valve, an in-line 50 x 50 mesh filter, and an outlet temperature gauge. Requires 45 - 90 psi (3 - 6 ATM) flowing pressure. Inlet and Outlet: 1\/2\" IPS. Electrical Supply: 480 VAC, 3-phase, 3 wire and ground. 24 Amp per Phase. FOR INDOOR USE ONLY.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eIt is ideal for areas where supply water temperatures fall below 60 ° F (15 ° C) while hot water is not present\u003c\/li\u003e \u003cli\u003eSystem consists of an 20 KW electrical instantaneous water heater, a hot shutoff valve, a bypass valve, an in-line 50 x 50 mesh filter, and an outlet temperature gauge\u003c\/li\u003e \u003cli\u003eRequires 45 - 90 psi (3 - 6 ATM) flowing pressure\u003c\/li\u003e \u003cli\u003eInlet and Outlet: 1\/2\" IPS.\u003c\/li\u003e \u003cli\u003eElectrical Supply: 480 VAC, 3-phase, 3 wire and ground. 24 amp per phase (optional 208\/240 3-phase available - ask for quote).\u003c\/li\u003e \u003cli\u003eUL listed for indoor use only.\u003c\/li\u003e \u003c\/ul\u003e \u003ctable style=\"height: 150px; width: 320px; border-width: 1px;\" frame=\"border\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eFlow Rate\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 4 gpm\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eMain Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eHardware Finish\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e \u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eLead Time\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eUnit of Measure\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e EA\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 6\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\u003cstrong\u003eWidth (in)\u003c\/strong\u003e\u003c\/td\u003e \u003ctd\u003e 12\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eHeight \u003c\/strong\u003e\u003cstrong\u003e(in)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 35\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e\n\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cstrong\u003e(lbs)\u003c\/strong\u003e\n\u003c\/td\u003e \u003ctd\u003e 27\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/haws_model_twbs_ew_h_specsheet_pdf.pdf\"\u003eSpec Sheet\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/intwbs_ew_h.pdf\"\u003eInstallation Drawing\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/twbs_ew_h.pdf\"\u003eOperational \/ Maintenance Manual\u003c\/a\u003e\u003c\/li\u003e\u003cli\u003e\u003ca href=\"https:\/\/www.hawsco.com\/wp-content\/uploads\/2020\/07\/eemax-1.pdf\"\u003eLimited Warranty\u003c\/a\u003e\u003c\/li\u003e","brand":"Haws","offers":[{"title":"Default Title","offer_id":45809064149165,"sku":"397-HAWSTWBS.EW.H","price":7902.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0734\/0766\/0205\/files\/383109__11088.png?v=1773337648"}],"url":"https:\/\/www.jendcosafety.com\/collections\/mixing-valve.oembed","provider":"Jendco Safety Supply","version":"1.0","type":"link"}