null

Fiberlock ABC Fiberspray Asbestos Encapsulant- 7oz - 6410

(No reviews yet) Write a Review
SKU:
240-FIB6410
Condition:
New
Shipping:
Calculated at Checkout
$24.99

Description

Fiberlock ABC Fiberspray Asbestos Encapsulant- 7oz - 6410

ABC FiberSpray is a convenient means for applying Fiberlock Technologies’ time proven ABC Asbestos Binding Compound asbestos encapsulant. ABC FiberSpray dispenses encapsulant from a unique 8 ounce “airless-spray” can. This CFC-free “airless-spray” technology minimizes asbestos fiber release, and permits application of encapsulant in any position, even upside down (ideal for use inside glove bags). The ABC encapsulant inside each can was found to meet U.S. Environmental Protection Agency (EPA) test requirements performed at Battelle Laboratories Under Government Contract# 68-03-2552-T2005. Encapsulation of small, hard-to-access areas can be accomplished quickly and easily, without the need for bulky spray equipment.

HOW TO USE

ENCAPSULATION

Use ABC FiberSpray to effectively encapsulate small areas of asbestos containing material (ACM).

GLOVEBAG USE

Place ABC FiberSpray in the pouch within the glovebag. Apply ABC FiberSpray to seal the friable pipe insulation ends after the insulation has been removed. Use ABC FiberSpray to “lockdown” residual microscopic fibers to the substrate.

BULK SAMPLE REPAIR

Apply ABC FiberSpray to friable areas after bulk samples have been removed from the ACM or suspected ACM.

PREPARATION

Shake well before spaying.  If nozzle orifice is clogged, remove the dried film from the cap or replace with an extra nozzle (provided upon request).

APPLICATION

Apply ABC FiberSpray by spraying the surface from a distance of 8 to 12 inches.

CLEANUP

Clean the nozzle with warm soapy water before the coating dries.

PRECAUTIONS

Store in a dry place at temperatures between 40°F (4.5°C) and 90°F (32°C). Approved respirators must be used to prevent inhalation of asbestos fibers that may be present in the air. Protective clothing should be worn. Tools and drippings should be cleaned immediately with clean, soapy water before the coating dries.  Careful consideration should be given to all Environmental Protection Agency (EPA), OSHA and state regulations in effect at the time of application of ABC FiberSpray.

Product Testing
EPA Requirements #68-03-2552-T2005
Fire Rating ASTM E84 Class A
Flame Spread
10
Fuel Contribution
10
Smoke Density
5
Product Specifications
Solids by Weight ± 2%
51.4%
Solids by Volume ± 2%
44.0%
viscosity at 70° F
60-75 Kreb Units
Specular Gloss:
82° ± 5 @60°
Flash Point:
Non-combustible
Weight Per Gallon ±0.5 lbs.
9.6 lbs/gal
Shelf Life
36 Months Min.
Calculated VOC:
64 Grams/liter
Individual Can:
35-40 ft2/can
Drying Times (@ 70-77° F, 50% R.H)
To Touch:
1-2 hours
To Recoat:
12-24 Hours
Minimum Application Temp:
50° F
Package Sizes  
8 Ounce Can
12 Cans/Case
Part Numbers  
8 Ounce - White
6410

  

View AllClose