ProFlex 7043 Nitrile Coated Cut-Resistant Gloves - Cut Level A4 - / 4X42D - 18g - 12-pair

The ProFlex 7043 Nitrile Coated Cut-Resistant Gloves feature nitrile coated palms and reinforced thumb saddles for extra-strength grip and durability in rough environments. Rated to ANSI/ISEA 105-2016 level A4 cut protection and level 3 abrasion resistance, the 18-gauge HPPE nylon-spandex knit protects hands from cuts, punctures and abrasions without compromising dexterity or comfort. The snug knit cuffs are longer than most, a feature that enhances fit and extends protection while keeping dirt and debris out.

MICROFINE NITRILE COATED PALMS FOR ALL-PURPOSE GRIP

The palms of these safety gloves are dipped in a microfine nitrile for excellent grip, dexterity and feel on a variety of surfaces.

ANSI/ISEA 105-2016 LEVEL A4 CUT RESISTANCE & LEVEL 3 ABRASION RESISTANCE // 18-GAUGE KNIT

The 18-gauge seamless HPPE polyester knit is tested to ANSI/ISEA 105-2016 level A4 cut protection and level 3 abrasion resistance for safety around sharp or rough materials. Classified by the weight needed to cut through, ANSI/ISEA 105-2016 level A4 is considered a relatively high cut rating with a measure of 1,500-2,199 grams. For more on cut-resistance levels, check out our ANSI/ISEA 2016-105 Guide.

Gauge indicates the number of stitching rows per inch-a higher gauge will have more flexibility and less bulk. When selecting safety work gloves, workers should look for the best possible balance of dexterity and protection for their job.

TOUCHSCREEN CAPABLE

Touchscreen-capable fingertips make it easy for workers to swipe, tap and type on smartphones and tablets without having to remove their work gloves.

These nitrile coated gloves are ideal for anyone regularly handling sheet metal or other sharp materials in wet or dry conditions, including construction, assembly, manufacturing, automotive and more.

Features:

• CUT RESISTANT - ANSI/ISEA 105-2016 level A4 cut protection and level 3 abrasion resistance for protection when working with sharp materials
• FLEXIBLE NO-SLIP GRIP - Microfine nitrile coated palms provide excellent grip, dexterity and feel for all-purpose handling on a variety of surfaces
• REINFORCED THUMB SADDLE - For extra-strength grip and durability in rough environment
• SUPERIOR FEEL & FIT - 18-gauge seamless HPPE polyester knit with nitrile coating is soft, lightweight and flexible for maximum feel and minimal hand fatigue
• TOUCHSCREEN CAPABLE - Easily swipe, tap and type on smartphones and tablets without removing gloves
• LONG SEAMLESS KNIT CUFFS - Fit snug to wrists to extend protection while keeping dirt and debris out
• MACHINE WASHABLE
• TESTED - Meets ANSI/ISEA 105-2016 level A4 cut resistant, level 3 abrasion resistant and level 3 puncture resistant; EN 388: 4X42D standards
• VEND-READY - Single pair is shrink-wrapped for easy dispensing

Unit of Measure: Pack/12-pair

Product Type	Gloves

Shipping

We Ship Internationally - We can ship to virtually any address in the world, with some restrictions on certain products.

Standard Delivery: Ground shipping typically delivers in approximately 5 business days from our Columbus, OH warehouse.

Expedited Options Available:

• Priority and Expedited handling speeds up processing
• Overnight shipping available (guaranteed) - must order by phone before 12pm EST M-F
• Some items ship "Manufacturer Direct" and cannot be expedited

Important: Inspect your delivery before signing! Note any damage on the shipping document.

Returns Policy

30-Day Return Window: Most new, unopened items can be returned within 30 days for a full refund.

Non-Returnable Items:

• Made-to-order fall protection products
• Used vacuums, respirators, gas monitors, or air scrubbers
• Calibration gas (hazardous material)
• PAPR and specialty respiratory items (non-stock)

Restocking Fee: 30% restocking fee or shipping costs apply if return is due to buyer error.

Refund Timeline: Expect refunds within 4 weeks, though many are processed faster.

View Complete Shipping & Returns Policy →