Haws Thermostatic Mixing Valve - 9201EW

Haws Thermostatic Mixing Valve - 9201EW

AXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash, with a flow rate of 10 gpm (38.8 L).

Haws Model 9201EW (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to a single emergency eye/face wash fixture requiring flow up to 10 gpm (37.8 L). Unit employs a paraffin filled thermostatic mixing element. Cold Water Bypass flow rate of 3.8 gpm (14.4 L). The improved brass design with supplied check valves, over-sized valve seats, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (29 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90 ° F (16 - 32 ° C). Min/max inlet hot water temperature: 120 °/180 ° F (49À ƒÃ† ’À ‚â € š °/82 ° C), with recommended inlet temperature: 140 ° F (60 ° C). Min/max inlet cold water temperature: 40 °/65 ° (4.4 °/18.3 ° C). Inlets and outlet: 1/2" NPT(F).

• A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range
• AXION's superior design and technology provide a complete safety solution for increased victim comfort.
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071)
• Modular brass design with supplied check valves
• Over-sized valve seats resist failures caused by foreign matter
• Efficient funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85 ° F (29 ° C).
• Tempered water: High temperature limit is factory set to 90 ° F (32 ° C).

Flow Rate	10 gpm
Main Finish	Brass
Hardware Finish	Brass
Lead Time	3
Unit of Measure	EA
Length(in)	2.625
Width (in)	6.125
Height (in)	5.25
Weight (lbs)	2

Spec Sheet

Installation Drawing

Parts Breakdown Drawing

Operational / Maintenance Manual

MasterSpec

Limited Warranty

Product Type	Eye Wash & Bottles

Shipping

We Ship Internationally - We can ship to virtually any address in the world, with some restrictions on certain products.

Standard Delivery: Ground shipping typically delivers in approximately 5 business days from our Columbus, OH warehouse.

Expedited Options Available:

• Priority and Expedited handling speeds up processing
• Overnight shipping available (guaranteed) - must order by phone before 12pm EST M-F
• Some items ship "Manufacturer Direct" and cannot be expedited

Important: Inspect your delivery before signing! Note any damage on the shipping document.

Returns Policy

30-Day Return Window: Most new, unopened items can be returned within 30 days for a full refund.

Non-Returnable Items:

• Made-to-order fall protection products
• Used vacuums, respirators, gas monitors, or air scrubbers
• Calibration gas (hazardous material)
• PAPR and specialty respiratory items (non-stock)

Restocking Fee: 30% restocking fee or shipping costs apply if return is due to buyer error.

Refund Timeline: Expect refunds within 4 weeks, though many are processed faster.

View Complete Shipping & Returns Policy →