Haws Thermostatic Mixing Valve - 9202E

Haws Thermostatic Mixing Valve - 9202E

AXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 78 gpm (295 L).

Haws Model 9202E (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency eyewash fixtures requiring flow up to 78 gpm (295 L). Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 50 gpm (189 L). The improved brass design with a one piece casting uses internal check stops, over-sized valve seats, a shuttle design that eliminates valve binding, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 ° F (26 ° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60-95 ° F (15 - 35 ° C). Maximum inlet temperature: 180 ° F (82 ° C). Recommended inlet temperature: 140 ° F (60 ° C). Minimum inlet temperature: 120 ° F (49 ° C) Inlets 1-1/4" NPT(F). Outlet 1-1/4" NPT(F).

• A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range
• Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
• Wax based thermostat technology for fast response time with proven highly reliable temperature control
• Highest Cold Water Bypass flow rate in the industry (64% of rated tepid flow rate)
• Modular brass design with internal check stops
• Over-sized valve seats resist failures caused by foreign matter
• A new and efficient shuttle design eliminates valve sticking
• A custom funnel design improves temperature control at low flow rates
• Outlet temperature is factory set to 85 ° F (29 ° C).
• Tempered water: High temperature limit is factory set to 90 ° F (32 ° C).

Flow Rate	78 gpm
Main Finish	Brass
Hardware Finish	Brass
Lead Time	5
Unit of Measure	EA
Length(in)	10
Width (in)	5
Height (in)	7
Weight (lbs)	18

Spec Sheet

Installation Drawing

Parts Breakdown Drawing

Operational / Maintenance Manual

Limited Warranty

Product Type	Eye Wash & Bottles

Shipping

We Ship Internationally - We can ship to virtually any address in the world, with some restrictions on certain products.

Standard Delivery: Ground shipping typically delivers in approximately 5 business days from our Columbus, OH warehouse.

Expedited Options Available:

• Priority and Expedited handling speeds up processing
• Overnight shipping available (guaranteed) - must order by phone before 12pm EST M-F
• Some items ship "Manufacturer Direct" and cannot be expedited

Important: Inspect your delivery before signing! Note any damage on the shipping document.

Returns Policy

30-Day Return Window: Most new, unopened items can be returned within 30 days for a full refund.

Non-Returnable Items:

• Made-to-order fall protection products
• Used vacuums, respirators, gas monitors, or air scrubbers
• Calibration gas (hazardous material)
• PAPR and specialty respiratory items (non-stock)

Restocking Fee: 30% restocking fee or shipping costs apply if return is due to buyer error.

Refund Timeline: Expect refunds within 4 weeks, though many are processed faster.

View Complete Shipping & Returns Policy →