Aargo Needles & Accessories

Aargo Heavy Duty 2 inch Cutter Hub (without Cutters) - 503007Cutter Hub 2 inch with a female 5/8-11thread for holding star or saw tooth cutters made from high grade hardened steel. Saw tooth star cutter measures 1 1/4 inch with a 5/8 inch hole made from...

Aargo Heavy Duty 2 inch Cutter Hub Assembly - 805036Cutter Hub 2 inch with a female 5/8-11 thread for holding star or saw tooth cutters made from high grade hardened steel. Saw tooth star cutter measures 1 1/4 inch with a 5/8 inch hole made from high...

Aargo Heavy Duty 2 inch Dust Collection Vacuum Attachment for Tool Small Air Powered Right Angle Sander Motor - 704001Heavy Duty attachment for the safe containment of dust and debris while sanding. This vacuum shroud attaches to Aargo Tools Heavy Duty...

Aargo Heavy Duty 2 inch Roloc Clean & Strip Disc - 572022Heavy Duty abrasive clean and strip disc. Made from semi open web which contains extra course silicon carbide through the entire thickness of the disc, providing longer use.Abrasive: 2 inch...

Aargo Heavy Duty 2 inch Roloc Disc Holder Max 30,000 RPM - 5720232 inch backup pad for Roloc type discs. 30,000 RPM Max. For use with any type of 2 inch to 3 inch Roloc type disc with 1/4 inch shaft.Length: 2 inches

Aargo Heavy Duty 2 inch Rotopeen Flap Holder Assembly (with Flaps) - 805006Industrial Quality 2 inch Flap Holder Hub assembly comes complete with 6 flaps. The Hub is made from machined aluminum that holds Rotopeen flaps securely in place for the...

Aargo Heavy Duty 2 inch Rotopeen Flap Holder Hub (without Flaps) - 503012Industrial Quality 2 inch Flap Holder Hub made from machined aluminum that holds Rotopeen flaps securely in place for the efficient removal of surface coatings, rust, paint, etc. It...

Aargo Heavy Duty 2 inch Rotpeen C Flap Reload - Set of 6 - 805026Industrial Quality 3M Flaps are 2 inches wide and consist of flexible leather loop construction with Tungston Carbide tips for removing most heavy coatings, rust, paint, etc. For use with...

Aargo Heavy Duty 2mm x 7 inch Flat Tip Needles - pack of 53 - 805016Flat tip needles 2mm x 7 inch made from high grade hardened steel. Pack of 23.  For use with 2mm needle support part # 376001 (Can be used in any 2mm Air powered needle gun)...

Aargo Heavy Duty 3 inch Dust Collection Vacuum Attachment for Tool Small Air Powered Right Angle Sander Motor - 704003Heavy Duty attachment for the safe containment of dust and debris while sanding. This vacuum shroud attaches to Aargo Tools Heavy Duty...

Aargo Heavy Duty 3 inch Roloc Clean & Strip Disc - 572024Heavy Duty 3 inch abrasive disc made from semi open web that contains extra course silicon carbide through the entire thickness of the disc. Outlasts most other discs. For use with Aargo Tools part...

Aargo Heavy Duty 3 inch Roloc Disc Holder Max 20,000 RPM - 5720253 inch backup pad for Roloc type discs. 30,000 RPM Max. For use with any type of 2 inch to 3 inch Roloc type disc with 1/4 inch shaft.Length: 3 inches

Aargo Heavy Duty 3mm x 7 inch Flat Tip Needles - pack of 23 - 805031 Flat tip needles 3mm x 7 inch made from high grade hardened steel. Sold individually. For use with 3mm needle support part # 576001 sold separately. (Can be used in any...

Aargo Heavy Duty 3mm x 7 inch Chisel Tip Needle - pack of 23 - 805030Chisel tip needles 3mm x 7in made from high grade hardened steel. Sold individually.(Can be used in any 3mm needle gun)Abrasive: 23 - 3mm x 7 inch hardened...

Aargo Heavy Duty 4 1/2 inch Velco Back Up Pad Max 10,000 RPM - 380003Heavy Duty 4 1/2inch Velcro Back up Pad for use with 4 1/2 inch Abrasive Velcro Disc. Can be used with Aargo Tools part # 572043 5 inch Velcro Clean and strip disc and Aargo Tools part...

Aargo Heavy Duty 4 1/2 inch Velcro Clean & Strip Disc - 572028Heavy Duty 4 1/2 inch abrasive disc with velcro backing made from semi open web that contains extra course silicon carbide through the entire thickness of the disc. Outlasts most other discs...

Aargo Heavy Duty 4 inch Cutter Hub (without cutters) - 559019Cutter Hub 4 inch with a female 5/8-11thread for holding star or saw tooth cutters made from high grade hardened steel.Length: 4.25 inches

Aargo Heavy Duty 4 inch Cutter Hub Assembly - 805035Cutter Hub Assembly 4 inch with Bearing support has 125 saw tooth cutters with female 5/8 -11 thread and made from high grade hardened steel. Ready to install on 4 inch Rotopeen. Saw tooth star cutter...

Aargo Heavy Duty 4 inch Roloc Clean & Strip Disc - 572036Heavy Duty 4 inch abrasive disc made from semi open web that contains extra course silicon carbide through the entire thickness of the disc. Outlasts most other discs. Abrasive: 4 inch...

Aargo Heavy Duty 4 inch Rotopeen Flap Holder Assembly (with Flaps) - 805009Industrial Quality 4 inch Flap Holder Hub assembly comes complete with 12 flaps. The Hub is made from machined aluminum that holds Rotopeen flaps securely in place for the...

Aargo Heavy Duty 4 inch Rotopeen Flap Holder Hub (without Flaps) - 805033Industrial Quality 4 inch Flap Holder Hub made from machined aluminum that holds Rotopeen flaps securely in place for the efficient removal of surface coatings, rust, paint, etc. It...

Aargo Heavy Duty 5 inch Dust Collection Vacuum Attachment for Tool  Air Powered Right Angle Sander Motor - 704016Heavy Duty attachment for the safe containment of dust and debris while sanding.  Meets or exceeds OSHA and EPA standards for the safe...

Aargo Heavy Duty 5 inch Roloc Disc Holder Max 10,000 RPM - 380004Heavy Duty rubber backing used to hold 5 inch Roloc type discs. Max 10,000 RPM. For use with Aargo Tools part # 572043R 5 inch clean and strip discs which can be ordered separately...

Aargo Heavy Duty 5 inch Velco Back Up Pad Max 10,000 RPM - 380005Heavy Duty 5 inch Velcro Back up Pad for use with 5 inch Abrasive Velcro Disc. To be used with Aargo Tools part # 572043 5 inch Velcro Clean and strip disc, can be ordered separately...

Aargo Heavy Duty 5 inch Velcro Clean & Strip Disc - 572043Heavy Duty 5 inch abrasive disc with velcro backing made from semi open web that contains extra course silicon carbide through the entire thickness of the disc. Outlasts most other discs. Discs...

Aargo Heavy Duty 5 inch x 5/8-11 Clean & Strip Disc - 572066Heavy Duty 5 inch abrasive disc made from semi open web that contains extra course silicon carbide through the entire thickness of the disc. Outlasts most other discs. Discs are 5/8 inch thick...

Aargo Heavy Duty 7 inch Dust Collection Vacuum Attachment for Tool Air Powered Right Angle Sander Motor - 704005Heavy Duty attachment for the safe containment of dust and debris while sanding.  Meets or exceeds OSHA and EPA standards for the safe...

Aargo Heavy Duty 7 inch Velcro Back up Pad Max 6,000 RPM - 380002Heavy Duty 7 inch Velcro Back up Pad for use with 7 inch Abrasive Velcro Disc. To be used with Aargo Tools part #572032 7 inch Velcro Clean and strip disc and Aargo Tools part # 904059 7...

Aargo Heavy Duty 7 inch Velcro Clean & Strip Disc - 572032Heavy Duty 7 inch abrasive disc with velcro backing made from semi open web that contains extra course silicon carbide through the entire thickness of the disc. Outlasts most other discs. Discs...

Aargo Heavy Duty Dust Collector Shroud Assembly For Needle Guns With 1 3/4 inch Diameter Head - 705033Dust collecting vacuum attachment with brushes that conform to a surface for the safe containment of dust, debris, hazardous and non-hazardous coatings...

Aargo Heavy Duty Dust Collector Shroud Assembly For Jex-24 Pistol Grip Needle Gun - 704054Dust collecting vacuum attachment with brushes that conform to a surface for the safe containment of dust, debris, hazardous and non-hazardous coatings being...

Aargo Heavy Duty Jex-24 2mm Needle Support Holds 52 Needles (needles sold separately) - 576000Needle Support 2mm for Jex-24 Needle Gun. Support Holds 52 2mm x 7 inch Needles. For use with Jex-24 Air powered Needle Gun part # 904078 can be ordered...

Aargo Heavy Duty Jex-24 3mm Needle Support Holds 23 Needles (needles sold separately) - 576001Needle Support 3mm for Jex-24 Needle Gun. Support Holds 23 3mm x 7 inch Needles. For use with Jex-24 Air powered Needle Gun part # 904079 can be ordered...

Aargo Heavy Duty small Air Powered Right Angle Sander Motor for use with 2 inch or 3 inch Dust Collection Attachments - 105011Powerful, lightweight, hand held, air powered sander quickly removes paint, rust and weld slag from various surfaces, including...

Aargo Heavy Duty Saw Tooth Star Cutter- pack of 100 - 805017Saw tooth star cutter measures 1 1/4 inch with a 5/8 inch hole made from high grade hardened steel. For removing mastic and other heavy coatings. Used with 2 and 4 inch cutter hubs part # 503007...