Fiberlock ChildGuard-Lead Based Paint Encapsulant-White 4gal

(No reviews yet) Write a Review
Calculated at Checkout


If a structure was built prior to 1980 then there is a distinct possibility that it contains lead based paint (LBP).

ChildGuard is a safe and effective alternative to the costly process of lead based paint removal and is accepted in all 50 states as a permanent abatement method.

ChildGuard is a water-based, paint-like coating blended specifically to form a barrier between lead based paint and the environment. ChildGuard is approved for use in all 50 states, and meets or exceeds all federal, state, and local standards for covering lead-based paint on interior or exterior surfaces. ChildGuard contains Bitrex®, a bitter-tasting, non-toxic ingredient to discourage oral contact.

  • Permanent solution appropriate for interior and exterior use
  • Impact-resistant
  • Inexpensive
  • 20 year warranty
  • Can be tinted with up to two ounces per gallon of universal colorant
  • Easy to apply with a brush or roller
  • 2 coats (7 dry mils) per application
  • Water-based easy clean up
  • Safe, nontoxic. Meets all HUD & EPA guidelines
  • Architectural Matte
  • Class "A" fire-rated
  • Certified or approved for use in all 50 states
  • Washable & can be painted over
  • Contains a bitter-tasting agent to discourage oral contact
Product Specifications
  Solids by Weight ± 2%
  Solids by Volume ± 2%
  viscosity at 70° F
95-120 Kreb Units
  Specular Gloss:
5.5° ± 1 @60°
  Flash Point:
  Weight Per Gallon ±0.5 lbs.
11.24 lbs/gal
  Shelf Life
24 Months Min.
(Original Sealed Container)
  Calculated VOC:
88 Grams/liter
  Non-Porous Surfaces
120 ft2/Gal
  Porous Surfaces
80-120 ft2/Gal
Drying Times (@ 70-77° F, 50% R.H)
  To Touch:
1-2 hours
  To Recoat:
8-16 Hours
  Minimum Application Temp:
50° F
  Package Sizes  
  1 Gallon  
  Part Numbers  
  ChildGuard - White
View AllClose