MSA ALTAIR io 4 Review

The MSA ALTAIR io 4 Gas Detection Wearable is a portable gas detector with cellular connectivity built in. It sends readings to the MSA Grid, MSA's cloud software, so a safety team can follow gas data and worker location while the job is under way. This review covers its design, sensors, connectivity, battery and location features, using MSA's published specifications.

Design and Durability

MSA's specifications list three durability tests for the ALTAIR io 4: more than 26 drops from 4 feet (1.2 m) under MIL-STD-810G 516.6, an incidental 25-foot (7.5 m) drop onto concrete, and 60 minutes in an NFPA 1982-2018 tumble tester. The detector carries an IP68 dust and water rating, which MSA states as 2 m for 1 hour.

Sensor Performance

The ALTAIR io 4 uses MSA XCell® sensors and can be configured for 1 to 4 gases. MSA's sensor options include Combustible (LEL), Oxygen, Carbon Monoxide, Hydrogen Sulfide, Methane, Sulfur Dioxide and Nitrogen Dioxide, along with low-concentration hydrogen sulfide and hydrogen-resistant carbon monoxide.

MSA lists a typical sensor life of 7 years for the oxygen, carbon monoxide, hydrogen sulfide and nitrogen dioxide sensors, and 5 years for the combustible sensor. MSA notes that sensor life can vary with environmental conditions and combustible sensor poisoning.

Connectivity and Integration

The ALTAIR io 4 has CAT-M LTE cellular connectivity built in and works with the MSA Grid. MSA says the detector deploys in seconds, right out of the box, with no IT required. It also has Bluetooth Low Energy (v4.1). MSA offers the Grid in Starter, Standard and Complete packages, and the features available depend on the package.

Purchase and MSA+ Subscription

MSA offers the ALTAIR io 4 by outright purchase or through MSA+, its subscription program covering hardware and software. MSA lists a 4-year warranty with outright purchase. For subscribers, MSA says the detector is covered under warranty regardless of its age, and notes that this is only available in selected locations.

MSA describes these features of MSA+:

  • No up-front device purchase: MSA says subscribers skip the capital expenditure process and the up-front purchase of devices.
  • Warranty while subscribed: coverage continues regardless of the age of the device, in selected locations.
  • Software and firmware updates: MSA says new features and functionality are pushed routinely to the Grid software and to the fleet.

Battery and Charging

The ALTAIR io 4 has a 2 Ah rechargeable battery. MSA lists a typical full charge time of 4 hours at room temperature, a charging temperature range of 0°C to 40°C, and a typical battery life of 17 hours on LTE-M. MSA notes that run time varies with cellular and GPS coverage, ambient temperature, alerts, usage and battery age.

Location Awareness

The detector has concurrent GNSS (GPS and GLONASS). MSA lists a GPS update frequency of 30 seconds once a position is acquired. When no position is acquired, the device searches for a location every five minutes to conserve battery. On a large or complex worksite, this lets a safety team see where workers are.

Final Thoughts

The ALTAIR io 4 combines a 1-to-4 gas detector with cellular connectivity, location tracking and the MSA Grid. MSA lists it for general industry, oil and gas, utilities, fire service, mining and construction, and for emergency response, turnarounds and plant maintenance, and confined space work. It is built for teams that want gas readings and worker location reported as the work happens.

Previous Post Next Post

Leave A Comment

Please note, comments need to be approved before they are published.

Welcome to our store
Welcome to our store
Welcome to our store