null

Fiberlock Leadshield Clear Post Removal Lockdown 5 Gallon

(No reviews yet) Write a Review
SKU:
240-FIB5470-5
Condition:
New
Shipping:
Calculated at Checkout
$132.65

Description

Lead Shield is a dual purpose binding agent that locks down residual lead dust and accepts most topical coatings.

Lockdown Residual Lead-Based Paint and Dust Present After Removal

Lead Shield is a water based 100% acrylic lockdown with a dual purpose; it binds residual lead-based paint and locks down lead dust present after removal. Lead Shield also accepts most topical coverings.
Lead Shield's unique features assist in obtaining final LBP removal certification.
 
Lead Shield is a water based 100% acrylic lockdown with a dual purpose; it binds residual lead-based paint and dust present after removal; and accepts most topical coverings. The clear version of this product sprays on white and dries clear to permit visual inspection of any residual paint. The translucent blue tint speeds up the post removal inspection process after the product has fully cured. The blue tint is advantageous because it enables an inspector to quickly identify areas that LBP has been removed from and subsequently locked down.
 
These unique features assist in obtaining final LBP removal certification. Lead Shield is a one step product which bonds to most surfaces eliminating the need for sanding, priming and sizing recently stripped walls. Lead Shield can be used on both interior and exterior surfaces, and was expressly formulated to prepare these surfaces to accept a final topical covering. Lead Shield should not be used as a substitute for encapsulation.
Fire Rating ASTM E84 Class A
Flame Spread
5
Fuel Contribution
0
Smoke Density
15
Solids by Weight ± 2%
29.0%
Solids by Volume ± 2%
26.1%
Viscosity at 70° F
85-90 Kreb Units
Specular Gloss:
35-40° ± 1 @60°
Flash Point:
Non-combustible
Weight Per Gallon ±0.5 lbs.
8.71 lbs/gal
Shelf Life
36 Months Min.
Calculated VOC:
96 Grams/liter
Non-Porous Surfaces
450 ft2/Gal
Porous Surfaces
100-300 ft2/Gal
Drying Times (@ 70-77° F, 50% R.H)
To Touch:
30 Minutes
To Recoat:
2 Hours
Minimum Application Temp:
50° F
Package Sizes  5 Gallon
Part Numbers  Clear 5470
View AllClose