Understanding the expiration date of a hard hat is critical for ensuring workplace safety. Hard hats are essential for protecting workers from head injuries, but their protective capabilities diminish over time. Knowing how to read and interpret a hard hat's expiration date is a key part of maintaining safety standards on the job. In this guide, we'll explain how to find and understand the expiration date on a hard hat, why it's important, and what the regulations say about replacing them.
How Long Do Hard Hats Last? The Short Answer
There is no single expiration date that applies to every hard hat. Follow the replacement instructions from your hard hat's manufacturer. For example, MSA says its hard hat shells should be used no longer than 5 years and its suspensions should be replaced after 12 months, both counted from the date of first use. MSA adds that, depending on the environment, application and use, a shell might need to be replaced as often as every two years. OSHA does not set an expiration date for hard hats. It tells employers to refer to the manufacturer's guidelines for recommended lifespan, and to document the date of purchase to track it.
To read the date code on an MSA V-Gard cap or hat, look under the brim. The large number inside the circle is the year, and the arrow inside the circle points to the month on the outer ring of numbers. MSA notes that this is the date the shell was molded, not the start of its service life, which begins when the helmet is placed into service. ANSI/ISEA Z89.1 requires manufacturers to permanently mark the date of manufacture on each helmet.
Sources: OSHA SHIB 3-6-2024, Head Protection: Safety Helmets in the Workplace; MSA, Care and Use of MSA Helmets FAQ (0600-43-MC); OSHA, 77 FR 37593 (June 22, 2012), summary of ANSI/ISEA Z89.1-2009 marking.
The Importance of Hard Hat Expiration Dates
Hard hats are made from materials like high-density polyethylene (HDPE), which degrade over time due to exposure to elements such as UV radiation, chemicals, and extreme temperatures. This degradation can compromise the hard hat's ability to protect against impacts. Therefore, monitoring the expiration date is vital for ensuring that the equipment continues to perform as expected.
Why Hard Hats Expire
- Material Degradation: Exposure to sunlight, extreme temperatures, and chemicals can weaken the plastic, making it brittle and less effective.
- Structural Integrity: Over time, the suspension system inside the hard hat may also lose its effectiveness, reducing the overall protection.
- Compliance with Safety Standards: OSHA requires that personal protective equipment (PPE) be maintained in a sanitary and reliable condition.
Finding the Expiration Date on a Hard Hat
Most hard hats have a date of manufacture stamped on the inside of the shell, often located under the brim or on the inner side of the helmet. This date is typically represented by a circular symbol or "date wheel" that indicates the month and year of production.
How to Decode the Date Wheel
- Year of Manufacture: The number in the center of the date wheel represents the year the hard hat was manufactured.
- Month of Manufacture: An arrow pointing to a number around the edge of the wheel indicates the month.
For example, if the number in the center is "22" and the arrow points to "6," the hard hat was manufactured in June 2022.
Hard Hat Lifespan: How Long Are They Good For?
While the exact lifespan of a hard hat can vary depending on the manufacturer and the conditions in which it is used, there are general guidelines for when to replace them:
- Shell: Follow the manufacturer's service life. MSA, for example, says its shells should be used no longer than 5 years from the date of first use, and as often as every two years depending on the environment, application and use.
- Suspension: MSA says its suspensions should be replaced after 12 months from the date of first use. Check your manufacturer's instructions for your model.
Manufacturer Recommendations
It is essential to follow the manufacturer's specific guidelines for replacement, which are usually provided with the hard hat. These guidelines take into account the materials used and the intended use of the hard hat.
Because MSA counts its replacement intervals from the date of first use, not the date of manufacture, MSA suggests using a marker or label to record the date a hard hat is first placed in service.
How to Inspect a Hard Hat
In addition to checking the expiration date, regular inspections of the hard hat are crucial for safety. Here’s what to look for:
- Cracks or dents in the shell: Any visible damage can indicate a compromised structure.
- Brittleness: If the hard hat feels brittle or stiff when flexed, it may be time to replace it.
- Fading or discoloration: UV damage can cause the material to degrade, even if there are no visible cracks.
- Suspension system integrity: Ensure that the suspension is not frayed, broken, or stretched out.
Regulatory Requirements and Industry Standards
In the United States, the Occupational Safety and Health Administration (OSHA) requires that personal protective equipment, including hard hats, be provided, used and maintained in a sanitary and reliable condition. OSHA does not set an expiration date for hard hats. For general industry, its head protection rule (29 CFR 1910.135) requires head protection that complies with ANSI Z89.1-2009, Z89.1-2003 or Z89.1-1997.
Best Practices for Extending Hard Hat Life
While hard hats have a defined service life, proper care can help maximize their lifespan:
- Storage: Store hard hats in a cool, dry place away from direct sunlight and chemicals.
- Cleaning: Clean hard hats with mild soap and water. Avoid using harsh chemicals that could degrade the material.
- Avoid Alterations: Never modify a hard hat by drilling holes, painting, or applying stickers that could compromise its structural integrity.
Conclusion
Regularly checking the expiration date and condition of a hard hat is essential for ensuring that it provides adequate protection. Understanding how to read the date of manufacture and following the manufacturer’s guidelines for replacement are key steps in maintaining workplace safety. By taking these precautions, workers and employers can help prevent head injuries and ensure compliance with safety regulations.
For more detailed information on hard hat expiration and related safety standards, consider reviewing resources from OSHA and ANSI, as well as manufacturer-specific guidelines.


Leave A Comment
Please note, comments need to be approved before they are published.