null
Haws

Haws Thermostatic Mixing Valve - 9201H

(No reviews yet) Write a Review
SKU:
397-HAWS9201H
UPC:
611970358048
Availability:
Call or Email for Availability!
Shipping:
Calculated at Checkout
MSRP: $2,791.00
Now: $2,372.35
— You save $418.65

Description

Haws Thermostatic Mixing Valve - 9201H

Lead-free AXION Emergency Tempering Valve thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment, with a flow rate of 31 gpm (117.3 L).

Haws Model 9201H (patent pending) is a lead-free thermostatic mixing valve that mixes hot and cold water to supply tempered water to emergency shower and eyewash fixtures requiring flow up to 31 gpm (117.3 L). Unit employs two paraffin filled thermostatic mixing elements. Lowest internal pressure drop where supply pressure is low, and a high Cold Water Bypass flow rate of 20 gpm (75.7 L). The improved brass design with a one piece casting uses internal check stops, oversized valve seats, a shuttle design that eliminates valve sticking, and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85° F (26° C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 90° F (16 - 35° C). Maximum inlet temperature: 180° F (82° C). Recommended inlet temperature: 140° F (60° C). Minimum inlet temperature: 120° F (49° C) Inlets 1" NPT(F). Outlet 1-1/4" NPT(F).

  • A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range
  • AXION's superior design and technology provide a complete safety solution for increased victim comfort.
  • Lowest internal pressure drop for this class of valve (advantage where supply pressure is low)
  • Wax based thermostat technology for fast response time with proven highly reliable temperature control
  • Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate)
  • Modular lead-free brass design with internal check stops
  • Over-sized valve seats resist failures caused by foreign matter
  • A new and efficient shuttle design eliminates valve sticking
  • A custom funnel design improves temperature control at low flow rates
  • Outlet temperature is factory set to 85° F (29° C).
Flow Rate 31 gpm
Main Finish Brass
Hardware Finish Brass
Lead Time 20
Unit of Measure EA
Length(in) 7
Width (in) 5
Height (in) 8
Weight (lbs) 13
  • Spec Sheet
  • Installation Drawing
  • Parts Breakdown Drawing
  • Operational / Maintenance Manual
  • MasterSpec
  • Limited Warranty
  • View AllClose

    Reviews

    View AllClose