Miller Fall Protection's NEW TurboLite EDGE PFL's
Miller Fall Protection's NEW TurboLite EDGE PFL's
When The Job Takes You to the Edge: Depend on Miller®
Cutting-Edge Fall Protection for Leading-Edge Environments
Honeywell’s extensive series of Miller TurboLite Personal Fall Limiters (PFLs) is even more versatile with the introduction of the TurboLite Edge Series.
Whether you work in construction, industrial, or even wind power, units for sharp and smooth edges as well as PFL and Tie-Back options will help you ensure workers are safe in applications requiring foot-level tie-off or work near edges.
Make Confidence Your True Edge TurboLite Edge PFLs are engineered to deliver the assurance you expect from Miller fall protection, in a wide range of lengths and innovative features.
Do You Know Where Your Edges Are?
In work sites of every variety, edges are much more common than people realize – and they may pose a greater risk than you’d expect.
Whether you’re laying roofing, traversing a beam, or simply working near the unprotected sides of an upper floor, falls over an edge are more hazardous than other falls.
Without protection designed for edges, traditional lifelines risk being severed, particularly when anchored at foot level – and Honeywell estimates suggest that as many as 80% of fall protection users have applications in which a lifeline will come in contact with an edge in the event of a fall.
Features
- Safe – Models are available for sharp and smooth edges. Sharp Edge models are ANSI Leading Edge certified. Smooth Edge models are designed for a radius ≥ 0.062 in. (1.6 mm).
- Versatile – Can also be used for foot-level tie-off or anchored overhead as a traditional SRL for workers up to 420 lbs.
- Reliable – Durable design with integral shock absorber is easy to repair and replace.
- Light – Reduce fatigue, increase productivity.
- Simple – Easy to install, easy to use.
- Configurable – A range of working lengths featuring cable, web, and tie-back options.
- TurboLite™ MAX Lightweight web lifeline for enhanced comfort when working near smoother edges.
ANSI’s New Standard for Safety
As awareness of this threat grows, new safety standards have been defined. The most stringent is ANSI Z359.14-2014 LE, which requires leading-edge protection to meet criteria such as:
• Safe for users connected at foot level
• Edge radius as sharp as 0.005 in (0.13 mm)
• Requires integral shock-absorber at the worker connection.
Honeywell Has Your Back:
The Miller TurboLite™ Edge Series
Honeywell’s extensive series of Miller TurboLite
Personal Fall Limiters (PFLs) is even more
versatile with the introduction of the TurboLite
Edge Series.
Whether you work in construction, industrial, or
even wind power, units for sharp and smooth
edges as well as PFL and Tie-Back options will
help you ensure workers are safe in applications
requiring foot-level tie-off or work near edges
Make Confidence Your True Edge
TurboLite Edge PFLs are engineered to deliver the assurance you expect from Miller fall protection, in a wide range of lengths and innovative features:
• Safe – Models are available for sharp and
smooth edges. Sharp Edge models are ANSI
Leading Edge certified. Smooth Edge models
are designed for a radius ≥ 0.062 in. (1.6 mm).
• Versatile – Can also be used for foot-level
tie-off or anchored overhead as a traditional
SRL for workers up to 420 lbs.
• Reliable – Durable design with integral shock
absorber is easy to repair and replace.
• Light – Reduce fatigue, increase productivity.
• Simple – Easy to install, easy to use.
• Configurable – A range of working lengths
featuring cable, web, and tie-back options.
The Versatility You Need.
The Safety You Depend On.
The TurboLite Edge Series is available in both web and galvanized cable options, with options for working lengths that range from 6–12 ft (1.8–3.7 m).
• TurboLite™ EXTREME
Tough galvanized-cable lifeline for
sharp edges and maximum reliability.
• TurboLite™ T-BAK™ EXTREME
Galvanized-cable lifeline for
sharp edges in a tie-back design.
• TurboLite™ MAX
Lightweight web lifeline for
enhanced comfort when working
near smoother edges.
• TurboLite™ T-BAK™ MAX
Lightweight
web lifeline in a tie-back design.
Click BELOW for Pricing & More Information!
Miller 6 ft. TurboLite Max Smooth EDGE PFL
Miller 9 ft. TurboLite Max Smooth EDGE PFL
Miller 12 ft. TurboLite Max Smooth EDGE PFL
Miller 6 ft. TurboLite Extreme Sharp EDGE PFL
Miller 9 ft. TurboLite Extreme Sharp EDGE PFL
Recent Posts
-
MSA Altair 4XR Calibration Guide
Regular MSA Altair 4XR calibration ensures the accuracy and reliability of your gas monitor's p …Oct 11, 2023 -
Type I and Type II Hard Hat Differences
Knowing the difference between Type I and Type II hard hats is more than just a personal choice—it's …Aug 16, 2023 -
ANSI Z359.14-2021 Explained: What It Means for SRDs
The new ANSI Z359.14-2021 standard, approved in June 2021, introduces significant changes to the …Jul 21, 2023